Airtightness
When it comes to the future of our homes, airtightness plays a big part. As we strive to improve our energy efficiency and focus on a fabric first approach, achieving a good level of airtightness in our buildings will help enhance thermal performance.
[To Download a FREE PDF of this guide scroll to the end]
Air leakage is a common problem in construction, with many buildings suffering significant heat loss due to air leakage.
What is Airtightness?
Air leakage is a common problem in construction, with many buildings suffering significant heat loss due to air leakage. Air leakage can be defined as unplanned movement of air through the building assembly or thermal envelope. Draughts from air leakage can waste a large proportion of heat generated in a building, and also result in decreased occupant comfort.
Airtightness focuses on reducing the air leakage in a home. This can be achieved by ensuring there is a continuous airtight layer around the entire building envelope. The position of the layer, and material or product used will vary according to construction and various other factors.
What Are The Airtightness Regulations?
The Building Regulations Part L specify that air leakage can be no more than 10m3/h/m2 @50pa – or 10m3/hr.
This means that 10 cubic metres of air can escape per hour for every square metre of the envelope surface area.
In contrast, the Passivhaus standard requires less than 1m3/h/m2 of air leakage, or in other words, a very high level of airtightness.
What Are The Benefits of Airtightness?
Two clear benefits of improving the airtightness in buildings is a reduction in energy usage and improvement in thermal comfort.
The thermal performance of a building is significantly reduced through uncontrolled air leakage. It would be counter-intuitive to specify high levels of insulation while ignoring airtightness. A building with good levels of airtightness will reduce energy demand and improve the performance of the insulation. It will also allow for a more controlled ventilation that can be designed according to the requirements of the building and its occupants.
Good levels of airtightness will also reduce drafts and cold surfaces which have a significant negative effect on thermal comfort of occupants. Finally, a reduction in air moving through the building assembly, will in turn reduce any moisture that passes through the building elements which will prolong the life of the building and materials.
Airtightness can also improve acoustics by reducing sound transfer.
Common Air Leakage Paths
There are many areas in a building that are susceptible to air leakage. Some common air leakage paths include:
Construction:
- around suspended ground floors – between floorboards, around joists, between concrete blocks, gaps left around services
-
windows and doors – around sills, thresholds and ill-fitting units, gaps around casements
-
gaps between dry-lining and ceilings
-
loft hatches poorly fitted or sealed
-
gaps in masonry, mortar joints and insulation
-
holes made for spot lights
-
around roof lights
-
around electrical sockets
-
junctions between structure and insulation, especially timber and steel frame construction
-
junctions in internal insulation
Bathrooms and kitchens:
-
gaps at plumbing to bath
-
gaps around waste pipe of WC
-
at base of soil vent pipe
-
at top of soil vent pipe
-
around kitchen waste pipe
-
gaps left around extractor fans and cooker hoods
How Can We Achieve High Levels of Airtightness?
There are three main parts to achieving good levels of airtightness.
The first is in the design. It is key to develop simple details that are buildable, avoiding complex junctions where possible.
The second part is in the construction. Operatives on site who are working with the airtightness layer must be trained in airtightness products to ensure they are installed correctly.
The final part is testing. A blower door test will enable you to establish the performance of the airtightness layer.
Air tightness testing is normally carried out toward the end of construction, but as soon as is viably possible in order for any leaks to be picked up and rectified. Air tightness testing is required by the Building Regulations for the construction of new buildings. The results of the tests are used within the energy efficiency calculations (SAP or SBEM).
Areas to Consider
While it is pretty straightforward to achieve an airtightness layer on a wall, roof or floor, the trickier bit comes at the junctions. Particularly, windows and doors, or penetrations into the assembly such as pipes and cables. These areas need to be carefully detailed to ensure the junctions are airtight.
The Detail Library has examples of how to detail some of these tricky junctions to ensure a continuous layer is maintained throughout.
Best Construction System for Airtightness?
Masonry construction requires careful detailing at junctions to ensure the airtight layer is maintained. This is often in the form of a parge coat to the internal leaf of the wall. A liquid or tape sealing is then applied where the wall meets the window and so on.
Airtightness in timber frame is often achieved with suitable timber boards or membranes, which are taped at all the joints and sealed to penetrations and windows/doors etc. These membranes can also act as a VCL and stop internal moisture reaching the timber frame and causing damp and rot issues.
SIPS and ICF builds are also known to achieve good levels of airtightness. If using these methods it is good to speak to the supplier early on to discuss the airtightness requirements.
Suitable Materials for Airtightness Layers
The most commonly used airtight materials are gypsum plaster or orientated strand board (OSB). Concrete is also airtight, and often used as the ground floor material as part of the airtight layer of the floor. Other airtightness barrier materials include membranes such as EPDM, polythene and polyethylene.
Where different airtightness materials meet in the construction, it is important to ensure careful detailing. Often these areas will be sealed with suitable airtightness tapes to avoid leakage. The installation of these tapes can be affected by dust and moisture, careful installation following manufacturers advice is key.
Brick and block construction are not considered to be airtight, this is due to mortar joints having a tendency to enable air leakage and they can deteriorate over time.
Although a brick or block wall is not airtight, if it has a continuous uninterrupted layer of interior plaster it will be sufficiently airtight. The plaster layer must cover any unseen areas, such as behind stairs or floor void areas, in order for it to be suitably airtight. This layer can sometimes be referred to as a parge coat.
In lightweight construction, the most common material used for airtightness is OSB (permeability rates must be checked as OSB performance varies) or other wood based boards such as plywood. The boards are glued or bonded with an airtight seal at their joints, to ensure airtightness.
What Do We Need To Consider When Making A Building Airtight?
Ventilation
People have raised concerns that a high level of airtightness will leave people with poor indoor air quality. The main way the Passivhaus standard solves this potential issue is by introducing fresh air by means of mechanical ventilation. This allows for a controlled air supply to enter the building and avoid draughty conditions (over supply) or feeling of stuffy or smelly conditions (under-supply).
In contrast, traditional methods using trickle vents and uncontrolled ventilation will be at the mercy of the wind speeds and temperature fluctuations of the local climatic conditions, to provide ventilation, which is clearly a less favourable approach.
With an airtightness level of 7m3/hr or better, a ventilation system will need to be installed.
Conclusion
Airtightness is an important step in the design and build process. Considering airtightness early on in the design stages will ensure a draught free dwelling, and protect the building assembly from any damage caused by moisture laden air.
For More Inspiration…
For More Inspiration…
Resources
If you want more inspiration on airtightness be sure to check out the following:
Ecological Building Systems
https://www.ecologicalbuildingsystems.com
ProClima
Download the Guide
Want to keep this for later? Enter your email below to get instant access to this free download — plus other helpful resources, guides, and updates from the Detail Library to support your projects and professional development.
This form collects information that we will use to send you useful updates from the Detail Library. No spam, no funny business! We will not share or sell your personal information. You can unsubscribe at any time.
