Description
More About This Detail
DL449B – CLT Ground Floor Slab Adjacent to Door – CLT Exposed Internally
This detail presents two options for a CLT wall junction with the ground floor slab near a door, where the CLT is exposed internally. It includes drainage, cavity barriers, and weathering strategies suited to external ground levels that vary in proximity to FFL.
See drawing notes for full information.
This Download Also Includes
DL451 – Door Elevation within CLT Wall – CLT at FFL
This elevation detail illustrates a door set within a CLT wall where the bottom of the CLT panel aligns with finished floor level. It should be read alongside DL449A, DL449B, and DL450. The detail confirms drainage channel layout and minimum ground clearance requirements around the threshold to protect the timber structure from moisture exposure.
See drawing notes for full information.
Other Details
You can find the associated details from this set below. And don’t forget, if you are a member you can also search for details in our full library spreadsheet. Just go to your account page and click on the link to the spreadsheet.
Disclaimer
The details must be regarded as a starting point for developing your own detail relevant to your specific project and needs.
We assume no legal liability or responsibility for loss or damage resulting from the use of information contained on our website.
We reserve the right to update or change information on the site at any time without prior notice.
Architectural drawings should be prepared by a qualified and experienced person, who holds the appropriate insurances. We offer no assurance or guarantee of Building Regulations approval or compliance through the use of these drawings. All drawings should be checked and approved by the appropriate approved inspectors.
Detail drawings (in all formats) sold on our website are copyrighted. They are for personal and commercial use in construction projects. They may not be published on any website, resold, repurposed or distributed beyond the uses outlined here.
The details are not to be used by manufacturers to demonstrate the use of their own products, or for use in other literature, marketing documents and other associated materials.
