DL534 – Recessed in-line two-panel horizontal sliding solar shutter – masonry 150mm cavity wall with lift and slide mixed door

Price range: £9.00 through £14.00 + VAT

The elevation (DL534), section A (DL534A), section B (DL534B) and plan (DL534C) show a recessed in-line two-panel horizontal sliding solar shutter with horizontal timber battens on a masonry cavity wall alongside a mixed timber and aluminium clad triple glazed lift and slide door. 

Section A is cut through the shutter zone and section B through the adjacent door opening, allowing both conditions to be read together. To accommodate the recessed shutter track flush with the brickwork face, an additional 50mm cavity is introduced, giving a combined 200mm cavity. The shutter is shown in the closed position in section and plan. The door is a combined fixed leaf and one opening lift and slide unit set in a deep reveal almost flush with the internal wall finish, with an insulated level threshold incorporating a threshold drain. 

The flat roof build-up comprises a single ply membrane over 150mm and 190mm A1-rated mineral wool, vapour control layer, 18mm plywood boarding, firrings, and minimum 150mm joists, with a reconstituted concrete coping stone and DPC at the parapet. The ground floor is a beam and block structure with 150mm insulation, 65mm screed, and floor finish, on trench foundations. 

See drawing notes for full information.

Features of this detail: masonry, 150mm cavity, 200mm cavity, full fill insulation, non-combustible insulation, partial fill insulation, reconstituted stone parapet, thermally broken lintel, flat roof, timber and aluminium door, lift and slide door, triple glazed door, triple glazing, deep reveal, full brick return / reveal, internally flush door, structural insulation, insulated threshold, level threshold, spreader plate, permeable paving, French drain, beam and block floor, trench foundation, recessed solar shading, single track solar shading

£14.00 + VAT
£9.00 + VAT
Want a discount? Become a member by purchasing Annual Membership Subscription – Pro Plan or Monthly Membership Subscription!
Want a discount? Become a member by purchasing Annual Membership Subscription – Lite Plan!
This product can be downloaded for free by members. To download this product, sign up by purchasing Monthly Membership Subscription, Annual Membership Subscription – Pro Plan or Annual Membership Subscription – Lite Plan.
somdn_product_page

Description

Other Details

You can find the associated details from this set below. And don’t forget, if you are a member you can also search for details in our full library spreadsheet. Just go to your account page and click on the link to the spreadsheet.

Check out the full set here

Disclaimer

The details must be regarded as a starting point for developing your own detail relevant to your specific project and needs.

We assume no legal liability or responsibility for loss or damage resulting from the use of information contained on our website.

We reserve the right to update or change information on the site at any time without prior notice.

Architectural drawings should be prepared by a qualified and experienced person, who holds the appropriate insurances. We offer no assurance or guarantee of Building Regulations approval or compliance through the use of these drawings. All drawings should be checked and approved by the appropriate approved inspectors.

Detail drawings (in all formats) sold on our website are copyrighted. They are for personal and commercial use in construction projects. They may not be published on any website, resold, repurposed or distributed beyond the uses outlined here.

The details are not to be used by manufacturers to demonstrate the use of their own products, or for use in other literature, marketing documents and other associated materials.

Read our full terms and conditions here

Join now to get full access to the details

Close Welcome Bar